Data Capture
User’s Manual 171
2. Point the scan window at the barcode from a distance within the
reading range.
3. Press the scan key or the pistol trigger. The imager projects a
laser aiming pattern similar to those used on cameras. The
aiming pattern is used to position the barcode or object within
the field of view.
4. Center the symbol in any orientation within the aiming pattern.
Ensure the entire symbol is within the rectangular area formed
by the brackets in the aiming pattern, then either wait for the
timeout or release the scan key to capture the image. A red
beam illuminates the symbol, which is captured and decoded.
Linear Bar Code
2D Matrix Symbol
To Next Page
Loading...
