Connections
User’s Manual 181
NOTE
802.11 a/b/g/n radio module is on by default, in order to
avoid wasting energy, you can switch it off.
NOTE
Suspending the terminal powers off the 802.11 a/b/g/n
radio and drops the radio connection. When the terminal
resumes, depending on the radio power mode and
security protocol selected, it may take up to 30 seconds for
the 802.11 a/b/g/n radio driver to re-associate the radio
to the network.
NOTE
Area coverage and radio performance may vary, due to
environmental conditions, access point types or
interference caused by other devices (microwave ovens,
radio transmitters, etc.).
NOTE
In case of heavy usage the Falcon X4 may get warm; this
is normal and does not mean a malfunction.
To Next Page
Loading...
