Need help?Do you have a question about the Datalogic MAGELLAN 3410VSi and is the answer not in the manual?
General| Type | Built-in bar code reader |
|---|---|
| Sensor type | - |
| Scanner type | 1D/2D |
| Light levels (direct sunlight) | 0 - 26100 lx |
| Linear (1D) barcodes supported | GS1 DataBar |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Data Matrix, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked Omnidirectional, GS1 Databar RSS14 Stacked, MicroPDF417, PDF417, QR Code |
| Cables included | RS-232 |
| Input voltage | 100 - 240 V |
| Input frequency | 50-60 Hz |
| Power source type | USB |
| Power consumption (typical) | 2.5 W |
| Standard interfaces | RS-232, USB |
| Connectivity technology | Wired |
| Product color | Black |
| LED indicators | Yes |
| International Protection (IP) code | IP52 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 10 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 152 mm |
|---|---|
| Width | 137 mm |
| Height | 94 mm |
| Weight | 600 g |
Procedure to properly seat the scanner into its mounting slots.
Steps to safely detach the scanner from its mount.
Explains functions triggered by different durations of pressing the scanner button.
Steps to select the appropriate interface type (RS-232, USB) for the scanner.
Instructions on how to enable or disable the camera button feature.
To Next Page