What to do if Datalogic MAGELLAN 3510HSi won't read barcodes?
If your Datalogic Scanner is having trouble reading barcodes, here are a few things to check: * Make sure the scanner window is clean. * Ensure the barcodes themselves are not wrinkled, smudged, or torn, as this can prevent the scanner from reading them. * Try scanning known-good labels of an active symbology to test the scanner's ability to read.
How to troubleshoot Datalogic Scanner no communication with host?
If your Datalogic Scanner is not communicating with the host system, verify the interface cable is securely attached to both the host and the scanner. Also, consult your technical support personnel or your host system manual to confirm the correct interface type, cable, and connection port(s) are being used for the scanner.
Details the physical ports for connecting the scanner, including USB and Host ports.
Explains different methods for powering the scanner, such as USB and AC adapter.
Explains the multiple functions of the scanner button based on press duration.
Describes the meaning of various LED states, indicating scanner status or errors.
Explains the different beep patterns and their significance for scanner feedback.
How to select the correct communication interface type for the scanner.
Steps to enable or disable reading barcodes from mobile phones.
Adjusts the scanner's performance for reading cell phone barcodes.
Lists recommended and prohibited cleaning agents for the scanner.
General| Type | Handheld Scanner |
|---|---|
| Scanning Technology | Laser |
| Humidity | 5% to 95% (non-condensing) |
| Interface | RS-232 / USB / Keyboard Wedge |
| Operating Temperature | 32°F to 122°F |
| Storage Temperature | -40°F to 158°F |
| Decode Capability | 1D, 2D, PDF417 |
| Light Source | 650 nm visible laser diode |
| Power Supply | 5V DC |
To Next Page