Magellan 9300i/9400i/9800i Setup Guide
A Global Payments Company Page 5
6 After scan, the device will beep twice to indicate that it scanned correctly.
7 After scan, the device will beep twice to indicate that it scanned correctly.
8 FOR OPTIONAL REMOTE DISPLAY USE ONLY. Skip this step barcode and continue to Step 9
if you are not using the Remote Display.
After scan, the device will beep twice to indicate that it scanned correctly.
9 After scan, the device will reboot and the green lights will stop flashing, indicating the device has
exited programming mode.
To Next Page
Loading...
