Datalogic Matrix 400 Quick Reference Guide

MATRIX 400™ QUICK GUIDE
10
The Autolearning Wizard option is advised for rapid configuration or for new users. It allows reader configuration
in a few easy steps.
1. Select the Autolearning Wizard button from the Main menu.
2. Place the desired code in front of the reader at the correct reading distance (see step 3 and the Optical
Accessory Selection table in the Appendix of this Quick Reference Guide).
3. Press the "Positioning" button. The reader continuously acquires images and gives visual feedback in the
view image window to indicate when the code is centered with respect to the reader's FOV. Move the reader
(or code) to center it. Press the Positioning button again to stop positioning.
4. Select a Calibration Mode choice and press the "Calibrate" button.
The reader flashes once acquiring the image and auto determines the best exposure and gain settings. If the
code symbology is enabled by default, the code will also be decoded.
3
4
5
Autolearning
Result

Datalogic Matrix 400 Specifications

General

Brand	Datalogic
Model	Matrix 400
Category	Laboratory Equipment
Language	English