Datalogic Matrix 410N User Manual

PROGRAMMING STRINGS
19
3
3.2.15 Run X-PRESS Function
The Matrix xpress command must have the following format:
XPRESS<space><1|2|3|4> <LF>
If the sequence is correct, the device immediately executes the X-PRESS function
associated with the selected number and confirms with the following message:
ACK <LF>
You can exit the X-PRESS function before its associated timeout by executing the same
command a second time (toggle). If the associated timeout has already expired, then
executing the xpress command a second time will run the function again.
If programming contents are wrong (i.e. a typing error) or due to a transmission error, the
device replies with the following message:
NACK <LF>
After transmitting the reply message, the device then waits for another programming string or
the exit from host mode programming command.

Datalogic Matrix 410N Specifications

General

Brand	Datalogic
Model	Matrix 410N
Category	Laboratory Equipment
Language	English