SETTINGS
38
MEMOR™ K
2. Tap Settings > Display > Advanced > Sleep to set the number of seconds without
user input activity before the system is suspended while running on either battery
power or external power.
If you use the Advanced settings page to set the auto-suspend timeouts, the Display
page’s Sleep control will display the Suspend on internal battery if no external power is
connected; if the device is connected to an external power source (USB or dock), it will
display the Suspend on external power.
If you set the Display page
’s Sleep control to a new value, it will override both timeouts
for external power and internal battery.
Wake-Up Configuration
The default wake-up sources are the left side trigger and the right side trigger and the
pistol trigger. Tap Settings > Datalogic Settings > Power Management > Configure
wake-up sources to enable/disable wake-up sources.
To Next Page
Loading...
Need help?
General
