SETTINGS
USER’S MANUAL
43
System Update
The A/B system update ensures a workable booting system remains on the disk during
an over-the-air (OTA) update. OTA updates can occur while the system is running, with-
out interrupting the user. Users can continue to use their devices during an OTA, the
only downtim
e during an update is when the device reboots into the updated disk parti-
tion.
To transfer the OTA package from your PC to the Memor K, follow the steps below:
1. Connect the device and the PC via USB cable (see “USB Connection” on page 61);
2. Copy the OTA package to the device Download fo
lder;
Local Upgrade
From the Settings menu, tap Datalogic Settings > System Update > Local upgrade. Tap
the menu icon on the top left corner of the screen and then tap Downloads.
Select the update package you want to install:
NOTE: The OTA package would be also available if copied into another
folder. You just need to select the right folder.
To Next Page
Loading...
