ENTER/EXIT PROGRAMMING MODE WIRELESS FEATURES
260
POWERSCAN™ PD/PM96XX
Docking (Connecting) Beep
Enables/disables a beep indication when the handheld is placed in the Base Station.
Leash Alarm
This setting specifies the number of seconds to sound the Leash Mode beeps (three per
second) when the handheld goes out of range. This is especially useful in instances
where the reader might inadvertently have been placed in a bag or cart.
For this mode to be effective, the reader must be linked to the Base Station. If the
reader is asleep or disconnected from the Base Station, there is no way for it to know
where it is relative to the Base Station because communication is not active between
the devices.
$CBTCB00
Docking Beep = Disable
Docking Beep = Enable
$CBTCB01
$CBTLB00
Leash Alarm = Disable
Leash Alarm = 1 Second
$CBTLB01
$CBTLB02
Leash Alarm = 2 Seconds
Leash Alarm = 3 Seconds
$CBTLB03
To Next Page
Loading...
Need help?
General
