Datalogic QD 2300 QuickScan L User Manual

4QuickScan
TM
L
Stand Mode Timeout Period
The Timeout Period for the transition from low power to sleep
mode can be set to one of the following durations:
•1 Hour
•5 Hours (default)
• Infinite Timeout — With this setting, there is no timeout,
thus the scanner will never go into sleep mode or beam
shut-off but will remain in low power mode until a label is
read.
Stand Mode Timeout Period = 1 Hour
Stand Mode Timeout Period = 5 Hours (Default)
Stand Mode Timeout Period = Infinite Timeout

Datalogic QD 2300 QuickScan L Specifications

General

Brand	Datalogic
Model	QD 2300 QuickScan L
Category	Barcode Reader
Language	English