Reading Parameters
14
QUICKSCAN™ QD2200
READING PARAMETERS
Move the reader toward the target and center the illumi-
nation system to capture and decode the image. See
"Using the Quickscan™ I QD2200" on page 5 for more
information.
The illuminator will remain on until the symbol is
decoded. As you read code symbols, adjust the distance at
which you are holding the reader.
Good Read Green Spot Duration
Successful reading can be signaled by a good read green
spot. Use the bar codes that follow to specify the duration
of the good read pointer beam after a good read.
GOOD READ GREEN SPOT DURATION
ENTER/EXIT PROGRAMMING MODE
Disable
★ Short (300 ms)
Medium (500 ms)
To Next Page
Loading...
