Operating Modes
16
QUICKSCAN™ QD2200
Flashing - The reader illuminator flashes on and off
regardless of the trigger status. Code reading takes place
only during the Flash On Time
1
. Double Read Timeout
1
prevents undesired multiple reads.
Stand Mode - No trigger pull is required to read a bar
code. Scanning is turned on automatically when an item is
placed in the reader’s field of view.
Trigger Object Sense - It is similar to Stand Mode. A trig-
ger pull is required to activate the decoder.
1. Controlled by Flash On Time and Flash Off Time. Use the PRG to
program these options.
SCAN MODE
ENTER/EXIT PROGRAMMING MODE
★ Trigger Single
Trigger Pulse Multiple
Trigger Hold Multiple
Flashing
To Next Page
Loading...
