Operating Modes
Quick Reference Guide 19
Pick Mode
Specifies the ability of the reader to decode labels only when
they are close to the center of the aiming pattern, which is the
area indicated by the two blue arrows. Pick Mode is a Decod-
ing and Transmission process where bar codes that are not
within the configurable distance from the center of the aiming
pattern are not acknowledged or transmitted to the host. It is
active only while the scanner is in Trigger Single mode. If the
scanner switches to a different Read Mode, Pick Mode is
automatically disabled.
NOTE
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
PICK MODE
ENTER/EXIT PROGRAMMING MODE
♦
PIck Mode = Disable
Pick Mode = Enable
To Next Page
Loading...
