Datamax-ONeil RL3 - Page 27

www.datamax-oneil.com 20
Common Settings:
Name
Value
New value
1
Continuous Label
Length (1/100 inch)
425
Distance the printer will advance after pressing the FEED button.
Distance is measured in 1/100 inch, i.e. 1000=10 inches.
2
Label Width (1/100
inch)
425
200 = 2-inch media
300 = 3-inch media
400 = 4-inch media
3
Maximum Label Length
(1/100 inch)
800
Distance must be greater than the length of your media, i.e. 1000=10
inches
4
Sensor Type
Continuous
Gap = Labels with gap
Continuous = Media with no gaps
Reflective = Labels with Q-Mark or black mark
3) After updating the “New Value”
columns, click the “Send”
button to send these changes
to the printer.
NOTE: NETira
™
CT will change its column status from a green to an orange triangle when values are
modified and do not match current printer values. Query the printer settings and if the orange triangle is
still present, try sending the “New Value” again.