Datamax-ONeil RL3 - C.4.2 WPA2-PSK W;Ccmp

www.datamax-oneil.com C-5
C.4.2 WPA2-PSK w/CCMP
1) Click on the “Wi-Fi” printer
component.
2) Click the “Click the WPA/WPA2”
radio button.
3) Change (or confirm) the
following parameter settings:
Group Cipher: CCMP
Network Authentication Type:
WPA2-PSK
4) Type the Pass Phrase under the
“WPA_PSK_TKIP/WPA2_PSK
settings” section. Note that Pass
Phrase is case-sensitive.
5) After updating the “New Value”
column, click the “Send” button
to send these changes to the
printer.
C.4.3 WPA2-PSK w/TKIP
1) Click on the “Wi-Fi” printer
component.
2) Click the “Click the WPA/WPA2”
radio button.
3) Change (or confirm) the
following parameter settings:
Group Cipher: TKIP
Network Authentication Type:
WPA2-PSK
4) Type the Pass Phrase under the
“WPA_PSK_TKIP/WPA2_PSK
settings” section. Note that Pass
Phrase is case-sensitive.
5) After updating the “New Value”
column, click the “Send” button
to send these changes to the
printer.