Important Safety Instructions
This printer has been carefully designed to provide many years of safe, reliable performance. As with all
types of electrical equipment, however, there are a few basic precautions you should take to avoid hurting
yourself or damaging the equipment:
• Carefully read the provided installation and operating instructions
• Read and follow all warning instruction labels on the printer
• Place the printer on a flat, firm, solid surface
• Make sure all openings on the printer remain unblocked; never insert anything into the openings or
ventilation slots
• Do not place the printer near a heat source
• Do not use your printer near water or spill liquid into it
• Be certain that your power source matches a listed voltage rating for the printer (if unsure, check with
your dealer or local utility company)
• Do not place the power cord where it can be stepped on and, if the power cord becomes damaged,
immediately replace it
• If service is required, use only qualified trained technicians to repair your printer
To Next Page