www.datamax-oneil.com B-2
Cleaning Pens and Cards - For Adhesive Applications
Part Number Printer Models
Step 1 and Step 2
RL3, RL3e, RL4, RL4e Label
A two-step process designed to remove adhesive residue and give the thermal printhead, rollers and
paper path a thorough cleaning.
Each step involves inserting a chemically saturated card into the paper path. Step one will remove
adhesive residue.
Step two will remove any chemical residue remaining from the Step one card as well as all dirt and other
contaminates from the thermal printhead, rollers and paper path. Sold in carton quantities.
To Next Page
Loading...