2 A-Class
1.1.1 Standard Features
This printer offers the following standard features:
• Right-handed or left-handed configurations
• Electronics card cage
• 4 MB Flash downloadable program memory
• 16 MB DRAM memory
• Host computer accessible memory for object temporary storage
• Two RS-232 serial interfaces (one of which is also RS-422/RS-485 capable)
• One IEEE 1284 compliant parallel interface
• One USB v1.1 interface
• A programmable GPIO Port
• Backlit ¼ VGA graphics display
• EFIGS (English, French, Italian, German, and Spanish) display languages
• Industry standard bar code symbologies
• Time stamp at print capability with time and date battery back-up
• Static brushes
• Printhead resistance verification
• Configurable fault-handling capability with reprint and void selections
• Parse error-tolerant command language interpretation
• Internal test labels for verification, validation, and configuration
• Multiple setup restore capability
• Paper retract control after print
• Ribbon low detection and warning
• Power-up, mode, and resident option hardware diagnostics
• Option hardware auto-detection
• Media peel bar
• Media inch counters
• Input line mode (ASCII text input) capability
• Firmware upgrades downloadable
• AGFA Scaleable Font Engine featuring dynamic font attributes
To Next Page
