Datamax A-Class A-4310 User Manual

A-Class 57
Communications (continued)
Menu Item Details
WLAN ADHOC Selects the DMXrfNETII default parameters, where:
NO
Exits the menu item without changing the current
settings.
YES
Restores WiFi defaults and initiates infrastructure
mode with an SSID of “Any.” All existing access point
associations will be deleted then established with the
closest available. (Useful when moving the printer to a
geographically distant location.)
SET FACTORY DEFAULTS
Returns the factory-programmed values, where:
NO
Exits the menu item without changing the current
settings.
YES Restores the default settings.
WLAN
Controls the communications settings for the
DMXfNetII Card, where:
MODE Selects between Wired or WiFi operation, where:
ENABLED Enables the WiFi interface.
DISABLED
Enables the wired interface.
BSS ADDRESS
Specifies the static IP address of the WiFi bridge
module.
; If DHCP is Enabled, this parameter will be ignored.
000.000.000.000 Is the address in standard octet format.
SIGNAL READINGS Displays the signal and noise ratios for the WLAN.
IP ADDRESS
Specifies the static IP Address; where:
192.168.010.026 Is the address in standard octet format.
SUBNET MASK
Specifies the static Subnet Mask Address, where:
255.255.255.000 Is the address in standard octet format.

Datamax A-Class A-4310 Specifications

General

Brand	Datamax
Model	A-Class A-4310
Category	Label Maker
Language	English