EasyManuals Logo
Home>Datamax>Printer>MP Compact4 Mobile Mark II

Datamax MP Compact4 Mobile Mark II User Manual

Datamax MP Compact4 Mobile Mark II
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
B-4
Printers Internal Web Pages
1. Open your web browser. Type in the IP Address of the printer. The Default IP is: 192.168.10.26.
Note: If you have assigned a different IP Address to the printer, make sure to enter the
correct IP Address.
2. The following page will appear:
The printer’s fourteen internal web pages are accessible via the navigation bar on the left-hand side.
These pages contain many items associated with printer configuration, the setup of the network card, as well
as wireless security settings.
You must provide a password to change any settings; the default password is sysadm
After changes are sent to the printer (on all web pages), the printer must be reset in order for the
changes to take effect. This can be done from the Reset Network Parameters web page.
If any address parameters were changed such as IP address, subnet or gateway, the printer might
not be viewable from the current host if they are no longer on the same subnet.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datamax MP Compact4 Mobile Mark II and is the answer not in the manual?

Datamax MP Compact4 Mobile Mark II Specifications

General IconGeneral
BrandDatamax
ModelMP Compact4 Mobile Mark II
CategoryPrinter
LanguageEnglish

Related product manuals