DataRemote POTS in a BOX CDS-9010 - Page 23

Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
point (AP) form a basic access device
(BSS), each computer in the BSS
must be configured with the same
BSSID.
Frequency
Choose channel frequency.
HT Physical
Mode
In HT (High Throughput) Physical
mode setting allow for control of the
802.11n wireless environment.
Operating
Mode
Mixed Mode: In this mode packets
are transmitted with a preamble
compatible with the legacy
802.11a/g, the rest of the packet has a
new format.
Green Field: In this mode high
throughput packets are transmitted
without a legacy compatible part.
Channel
Bandwidth
20 Channel Width = 20 MHz
20/40 Channel Width = 20/40 MHz
Extension
Channel(5GHz
Only)
Auto to choose extension channel
frequency.
VHT
Option(5GHz
Only)
With IEEE 802.11ac standard, very-
high-throughput can be configured to
operate on the 5 GHz frequency
band.
VHT
Bandwidth(5G
Hz Only)
20/40 Channel Width = 20/40 MHz
80 Channel Width = 80 MHz