Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
6 Trouble shooting of the guide
6.1 Setting your PC to get IP automatically
Following are the process of setting your PC to get IP automatically
Step 1.Click “begin”
Step 2.Select “control panel”, then double click “network connections” in the “control panel”
Step 3. Right click the “network connection” that your PC uses, select “attribute” and you can see the interface as picture 1:
Step 4.Select “Internet Protocol (TCP/IP)”, click “attribute” button, and you can see the interface as following Picture 2 and you should click the “Get IP address automatically”.
To Next Page
Loading...
