Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
6.2 Cannot connect to the configuration Website
Solution:
Check to ensure the Ethernet cable is properly connected, then
Check to ensure the URL is correct, the format of URL is: http:// the IP address: 8080, 8080 must be added, then
Check to ensure the version of IE is IE8, or use another browser such as Firefox or Mozilla, then Contact your administrator, supplier, or ITSP for more information or assistance.
6.3 Forget the Password
If password has been forgotten , and you cannot access to the device website.
The solution is to factory default: press reset button for 40 seconds.
To Next Page
Loading...
