Datavan S-615W - Page 47

FREQUENTLY ASKED QUESTIONS (FAQ)
47
Chapter 6
Frequently Asked Questions (FAQ)
How do I clear CMOS?
S-615W
To clear CMOS, do the following:
1. Turn off power and pull out the power cord.
2. Insert the JP3 jumper cap to clear CMOS PIN and remove the jumper cap from clear
CMOS PIN.
3. Switch on the power again.
4. Press <F2> to enter CMOS setting and load optimized defaults.
JP3: Clear CMOS
123
Pin Denition Denition
1-2 Normal 1-2
2-3 Clear CMOS