4
1. Introduction
The MCU-200P is a multiple camera controller designed for controlling Panasonic camcorders. Its useful
and user-friendly design allows you to connect a maximum of 4 Panasonic camcorders through the
Ethernet cables and an adapter box. Major functions of several Panasonic camcorders can be easily
operated and controlled using the MCU-200P at up to 300m away from the controller unit.
The Datavideo MCU-200P Controller is capable of remotely configuring Panasonic P2 Camcorders such as
the AG-HPX255, AG-HPX371 or AG-HPX600 from an OB Van. The MCU-200P can connect up to four
Panasonic cameras allowing settings from one camera to be quickly aligned with other cameras. With
features similar to the Panasonic AG-EC4G Extension Control Unit, the MCU-200P reduces cost in
manpower and equipment and saves setup time and disk space for you.
To get more value out of this equipment please take a few minutes to read through this manual. This will
help familiarizing yourself with all the aspects of the MCU-200P control unit.
That’s Datavideo; sharing the value!
1.1 Feature
• Four RJ-45 Ethernet ports allow remote setup of up to four Panasonic cameras.
• RJ-45 cabling allows unit to be placed up to 300m away from the camera(s).
• Control of Record and Playback functions.
• Control of Camera User memory functions.
• Control of Camera OSD Menu Navigation.
• Control of Shutter speed and degree functions.
• Control of Iris adjustment.
• Control of AWB & ABB functions.
• Control of White Balance A, B and Preset functions.
• Control of Camera Knee & Bars functions.
• Control of Camera Gain adjustment.
• RGB Black Level / R & B gain and Master Pedestal controls.
1.2 Compatible Panasonic Camera Models*
• AG-HPX255
• AG-HPX300
• AG-HPX301
• AG-HPX302
• AG-HPX304
• AG-HPX370
• AG-HPX370P
• AG-HPX371
• AG-HPX372
• AG-HPX500
• AG-HPX502
To Next Page
Loading...
Need help?
General
