EasyManuals Logo

Datavideo MCU-200P User Manual

Datavideo MCU-200P
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
15
4. Firmware Update Procedure
From time to time Datavideo may release new firmware to either add new features or to fix reported
bugs in the current MCU-200P firmware. Customers can update the firmware themselves if they wish or
they can contact their local dealer or reseller for assistance should they prefer this method.
This page describes the firmware update process and it should take approximately 20 minutes total
time to complete. Once started the update process should not be interrupted in any way as this could
result in a non-responsive unit.
As well as a working MCU-200P you will need:
The latest firmware update for the AD-1P units and the MCU-200P.
USB 2.0 cable (USB A type-to-Micro USB).
A Windows computer (Vista / 7) with USB 2.0 port.
Note: It is best to update the firmware of the AD-1P unit(s) at the same time as the MCU-200P.
4.1 How to update the MCU-200P firmware
1. Turn off the MCU-200P power.
2. Connect the MCU-200P to the PC via a USB cable.
3. Set the five switches on the MCU-200P unit to their middle position.
4. Move switch up towards (AWB) and at the same time also press the shutter select button in. Hold
both in place.
5. Turn on the MCU-200P po we r.
6. MCU-200P LED display will show “L-x.x, and the PC will find MCU-200P by USB 2.0.
7. Open “MCU-200P_U1disk on PC.
8. Delete the bootcode.bin file in “MCU-200P_U1disk.
9. Copy new xxxxxxxxx.bin file to the “MCU-200P_U1disk. Do not worry about the new file name, the
MCU-200P will amend the file name automatically after reboot.
10. Reboot MCU-200P.
Note: It is best to update the firmware of the AD-1P unit(s) at the same time as the MCU-200P.
4.2 How to update the AD-1P firmware
1. Connect AD-1P to the PC via a USB cable (USB A Type Micro USB)
2. Power on PC
3. Copy the firmware binary file to AD-1P from the PC.
Note:
1: It is best to update the firmware of the AD-1P unit(s) at the same time as the MCU-200P.
2: Please use win7 or earlier operating system.
3: AD-1 and AD-1P share the same firmware.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datavideo MCU-200P and is the answer not in the manual?

Datavideo MCU-200P Specifications

General IconGeneral
BrandDatavideo
ModelMCU-200P
CategoryControl Unit
LanguageEnglish

Related product manuals