8
2.2 Front View
Keyboard Control Guide
Use this switch to power the MCU-200P On or Off.
Select the button for the camera that you wish to control.
Using the LOAD SAVE button it is possible to transfer the current
setting from one camera to another.
MU-1, MU-2 & MU-3 can be used to store the setting within the
MCU-200P.
Recorder / Playback functions
ENABLE when selected activates the recorder / playback functions
of the chosen camera. These include rewind [REW], fast forward
[FF], record start/stop [REC S/S], stop, play and record check [REC
CHK].
REC CHK makes it possible to check what has just been recorded (2
seconds REC review) by pressing this button during REC pause.
With a DVCPRO HD camera recorder, the tape is cued to provide
continuity from one shot to the next when this button is pressed
while playback is paused.
Playback
Functions
Selection
Signals Enable
Pedestal
LED Display
UPDATE
To Next Page
Loading...
Need help?
General
