Datum TYMSERVE 2000 User Manual

TABLE OF CONTENTS
TS2000-ACTS. For more information on this
variable, refer to the TS2000 Users Manual. If
this variable is queried on the TS2000-GPS or
TS2000-IRIG it will return N/A."
::= {ts2Vars 7}
ts2CallInterval OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "FORMAT: MM/DD/HH. All 8 digits are required
for set requests. Use \ or / as delimiters.
The variable is used to read or set the call
interval time. It is only valid on the
TS2000-ACTS. For more information on this
variable, refer to the TS2000 Users Manual. If
this variable is queried on the TS2000-GPS or
TS2000-IRIG it will return N/A."
::= {ts2Vars 8}
ts2CallOnReset OBJECT-TYPE
SYNTAX INTEGER {
nocall(0),
call(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The variable is used to read or set the TS2000-
ACTS Reset behavior. It is only valid on the
TS2000-ACTS. For more information on this
variable, refer to the TS2000 Users Manual. If
this variable is queried on the TS2000-GPS or
TS2000-IRIG it will return 0."
::= {ts2Vars 9}
ts2ACTSPrefix OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The variable is used to read or set the NIST
ACTS dial prefix. It is only valid on the
TS2000-ACTS. For more information on this
variable, refer to the TS2000 Users Manual. If
this variable is queried on the TS2000-GPS or
TS2000-IRIG it will return N/A."
::= {ts2Vars 10}
ts2ACTSPhone OBJECT-TYPE
TYMSERVE 2000 Manual Datum Inc, Bancomm Div.
xlvi

Datum TYMSERVE 2000 Specifications

General

Brand	Datum
Model	TYMSERVE 2000
Category	Server
Language	English