9
5. FEATURES
5.1 System features
• Provides warning indications for system faults;
• Has adjustable pressure setting to allow for various operating conditions;
• Provides automatic “cut-out” protection should the pump run out of water, should the pump fail to start
due to low voltage or a blockage in the pump;
• Enables the pump to deliver a constant pressure of water particularly across a wide range of flow rates –
reducing the inconvenience of pressure variation in showers etc.
* Allows for independent switch to override DynaDrive operation. This could be particularly handy if using a
float switch in a source tank;
* Allows for remote alarm monitoring;
* Allows for daisy-chain multiple DynaDrive systems; and
* Allows for adjustment of cut-in pressure. This could be particularly handy in applications with slow leaks.
5.2 DynaDrive display layout
Figure 5.1
P/N:16115-1 BP/N:16115-1 B
Prime Button
Automatic on / manual off button
Prime LED
Automatic LED
Menu button
Enter button
Menu up button
Menu down button
Power LED
Fault LED
To Next Page
Loading...
