24
• Once the motor has slowed to a stop, press and hold the
Menu button and Enter button for ~
5 seconds. The display will change to show your current set pressure, see figure 7.9;
• If the controls are untouched for ~ 30 seconds, the menu will revert back to normal display;
• Using the
Menu up button and
Menu down button scroll through to TYPE;
• Use the
Menu up button and
Menu down button to change the setting from
SINGLE to MASTER;
• Press the
Enter button to save settings and return to the HOME SCREEN;
• Repeat this process with the other pump in the system, selecting SLAVE;
• Now restart automatic operation by pressing
Automatic on / manual off button.
To Next Page