14
To turn on COVER MODE:
70% – 09:35 AM
CHLORINE OUTPUT
> From the HOME screen, press menu/setting select.
> The display will show this screen:
MODE
1. COVER
> From this screen, press menu/setting select to enter cover mode menu;
> The display will show the current COVER MODE setting (ie COVER MODE off shown):
1. COVER
OFF
> Press the menu up/down buttons to toggle between COVER MODE on and off;
> Press
menu/setting select once your preferred COVER MODE is displayed;
> This will then take you back to the first setting menu;
> If the EcoSalt2 is left untouched for ~ 30 seconds, or the
menu/setting cancel (go back) button is
pushed, the display reverts to the HOME screen.
ENGLISH
To Next Page
Loading...
