15
COVER MODE can also be triggered remotely
by an automated pool cover controller. By
closing the terminal block contacts on the
rear of the power supply, the EcoSalt2 will
remotely switch to COVER MODE. This
can be overridden by user intervention, by
following the steps explained previously.
ACTIVATING BOOST MODE
Should the pool experience a heavy bather load, debris/contamination, or extreme warm weather, there may
be a need to super-chlorinate the pool. Turning on the BOOST MODE increases the cell duty cycle to 100%
and overrides the cell current (output) to 100% for a period of 24 hours.
To turn on BOOST MODE:
70% – 09:35 AM
CHLORINE OUTPUT
> From the HOME screen, press menu/setting select.
> The display will show this screen:
ENGLISH
ENGLISH
To Next Page
Loading...
