13
> Press
menu/setting select once your preferred clock hour is displayed;
> If a mistake is made, the setting can be changed later;
> Next, the clock minutes will be flashing;
> The clock minutes can be changed by pressing the
menu up/down buttons to scroll to your
chosen time;
> Press
menu/setting select once your preferred clock minutes is displayed;
> If a mistake is made, the setting can be changed later;
> Next, the clock AM/PM will be flashing;
> The clock AM/PM can be changed by pressing the
menu up/down buttons to toggle
between AM and PM;
> Press
menu/setting cancel (go back) button once your preferred OFF-TIME for TIMER 1 is displayed;
> If a mistake is made, the setting can be changed later;
• The display then automatically reverts to the following screen:
TIMER 2
ON 05:00 PM
Figure 10.8
> The screen shows the ON-TIME of TIMER 2:
■ current ON-TIME of TIMER 2 is 5:00pm.
> Initially the clock hours will be flashing;
> The clock hours can be changed by pressing the
menu up/down buttons to scroll to your chosen time;
> Press
menu/setting select once your preferred clock hour is displayed;
> If a mistake is made, the setting can be changed later;
> Next, the clock minutes will be flashing;
> The clock minutes can be changed by pressing the
menu up/down buttons to scroll to your
chosed time;
> Press
menu/setting select once your preferred clock minutes is displayed;
> If a mistake is made, the setting can be changed later;
> Next, the clock AM/PM will be flashing;
> The clock AM/PM can be changed by pressing the
menu up/down buttons to toggle
between AM and PM;
> Press
menu/setting select once your preferred clock AM/PM is displayed;
> If a mistake is made, the setting can be changed later;
• The display then automatically reverts to the following screen: