22
3. COVER
OFF
Figure 12.16
> Press menu up/down buttons to toggle between COVER MODE on and off;
> Press
menu/setting select once your preferred COVER MODE is displayed;
> This will then take you back to the first setting menu;
> If the ChloroMatic Nipper is left untouched for ~ 30 seconds, or the
menu/setting cancel (go back)
button is pushed, the display reverts to the HOME screen.
COVER MODE can also be triggered remotely
by an automated pool cover controller. By
closing the terminal block contacts on the rear
of the power supply, the ChloroMatic Nipper
will remotely switch to COVER MODE. This
can be overridden by user intervention, by
following the steps explained previously.
Figure 12.17
To Next Page
Loading...
Need help?
General
