Page | 11
©Davis Instruments Australia V1.3
5 Web Interface
The Web Interface is used to configure all MeteoBridge settings. Enter your
MeteoBridge IP address into a web browser and if prompted use the following login
details.
Username: meteobridge
Password: meteobridge
5.1 Setup Network
5.1.1 Type of Connection
Choose either LAN or Wireless LAN. For Wireless LAN enter your wireless network
details and select ‘Save and Apply and Reboot’ then disconnect the Ethernet cable.
Your MeteoBridge should still be accessible at the same IP address.
Note: To use the MeteoBridge Ethernet port with WLIP ensure LAN Bridge is selected.
To Next Page
Loading...
Need help?
General