Page | 23
©Davis Instruments Australia V1.3
Appendix B: MeteoBridge for Wireless Weatherlink Communication
MeteoBridge can now be used in conjunction with Weatherlink on the PC, allowing
both systems to run simultaneously.
1. Check MeteoBridge is running Version 2.5
- Open the MeteoBridge Web interface
- Go into the System tab
- Check the Software Version is displaying MeteoBridge 2.5
- If it is a showing a different version set version control to “newest”
- Click Save and Apply, then click Reboot.
- Once it’s rebooted check the version is displaying 2.5
2. Setup Communications Port
- Open Weatherlink
- Goto Setup -> Communication Port
To Next Page
Loading...
Need help?
General