Page | 9
©Davis Instruments Australia V1.3
4.2.1 Connecting into LAN router
Connect the WLIP and the MeteoBridge into the LAN ports of your router, as shown
below.
4.2.2 Connecting into MeteoBridge router
For this setup the MeteoBridge needs to be configured to connect to a WLAN and to
act as a bridge.
Open the MeteoBridge Web Interface.
Select Setup Network tab.
Select connection type Wireless LAN and enter in your network details.
Ensure LAN Bridge is selected.
Click Save and Apply and Reboot.
To Next Page
Loading...