EasyManuals Logo

DAVIS Vantage Pro2 User Manual

DAVIS Vantage Pro2
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Running the Software
15
Low alarms work the same way. For example, if the wind chill threshold is set
for 30 ºF, the alarm begins sounding when the temperature drops to 30.0 º and
will continue until the temperature again rises above 30.0º.
If you’re on battery power, the alarm will sound for two minutes only. If
you’re using the AC adapter, the alarm will continue as long as the condition
exists. The alarm will also sound again for each new alarm.
To silence a sounding alarm, edit the Alarm setup screen to either delete the
alarm threshold or to modify the threshold so that the current conditions don’t
cause an alarm.
Three special alarms
ET (Evapotranspiration)
ET is updated only once an hour, on the hour. If during a given hour the ET
Value exceeds the alarm threshold, the ET alarm sounds at the end of that hour.
This is true for daily, monthly, and yearly ET alarms. You must have the
optional Solar Radiation Sensor to use this alarm.
Barometric Pressure
The Weather Envoy allows you to set two barometric pressure alarms: a “rise”
alarm and a “fall” alarm. You may select any rate of change per hour between
0.01 to 0.25 in Hg (0.1 to 6.4 mm Hg, 0.1 to 8.5 hPa/mb); the alarm will sound
if the rate of change (in the selected direction) exceeds the threshold you set.
Time
The time alarm is a standard “alarm clock”. It sounds at the set tim. Make sure
you choose AM or PM, if you’re in 12-hour mode. It sounds for one minute.
Auto Download
You may set up the software to automatically download data at specified times
each day (the software must be running and a constant connection to the data
logger in the Envoy must be made).
1. Select Auto Download from the Setup menu or press Ctrl-J.

Other manuals for DAVIS Vantage Pro2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DAVIS Vantage Pro2 and is the answer not in the manual?

DAVIS Vantage Pro2 Specifications

General IconGeneral
Update Interval2.5 seconds
Temperature Accuracy±1°F (±0.5°C)
Barometric Pressure Range16.00 to 32.50 inHg (540 to 1100 hPa)
Rain Collector TypeTipping bucket
Wind Speed Range0 to 200 mph (0 to 322 km/h)
Wind Speed Accuracy±2 mph (±3 km/h) or ±5%, whichever is greater
Wind Direction Resolution
Wind Direction Accuracy±3°
Solar Radiation Range0 to 1800 W/m²
Solar Radiation Sensor Accuracy±5%
UV Index Range0 to 16
UV Index Accuracy±5%
Wireless Transmission RangeUp to 1000 ft (300 m)
Temperature Range-40°F to +150°F (-40°C to +65°C)
Humidity Range0 to 100%
Humidity Accuracy±3%
Rain Collector Resolution0.01 in (0.2 mm)
Rain Measurement Accuracy±4%
Wind Direction Range0 to 360°
Power SupplySolar powered with battery backup

Related product manuals