DaytonAudio DTA-1 - Specifications; Warranty Information; Warranty Coverage; Warranty Exclusions

Specifi cations:
Power Output: 15 watts RMS x 2 into 4 ohm
Total Harmonic Distortion: <0.04% @9W
<10% @15W
Minimum Speaker Impedance: 4 ohm
Signal-to-Noise Ratio: 103 dB, A weighted
Input Impedance: 2 k ohm ±5%
Frequency Response: 20-20,000 Hz
Channel Separation: 95 dB
Effi ciency: >88% @ 10W, 8 ohm
Dynamic Range: 102 dB
Electrical Requirement: 12VDC @ 2A center pin positive
Dimensions: 2" (H) x 6" (W) x 3.5" (D)
Weight: 0.5 lbs (without batteries)
Dayton Audio
®
Last Revised: 2/21/2017
daytonaudio.com
tel + 937.743.8248
info@daytonaudio.com
705 Pleasant Valley Dr.
Springboro, OH 45066
USA