This defines how the device handles received SMS messages.
1. Call Function – This mode is used to support Call Back function via incoming
GSM messages. Appendix B describes the three different modes of
operations in order to meet the different requirements from various SIP
servers. Please note that the SIP server registered must be configured for
this operation.
This parameter specify which SMS Dial mode is used. Please refer to
Appendix B for more information on the modes available.
The parameter is applicable for SMS Dial mode. It allows a prefix to be
added to the phone number of the called party.
2. Forward Function – This mode forwards incoming GSM SMS to a SIP terminal
and a GSM number.
Incoming GSM messages (SMS) received are forwarded to the SIP Phone
Number specified in this parameter.
Incoming GSM messages (SMS) received are forwarded to the GSM Phone
Number specified in this parameter. The channel received the message is
used to forward the message.
This parameter enables the device to inform the SMS Server when a SMS
sent from the SMS Server is received by the recipient.
To Next Page
Loading...
Need help?
General
