107
Technical Information
Firmware Updates
The USB or Ethernet connector on the back panel of the VENU360 can be used to perform firmware updates. Connect the
USB port to a compatible computer for performing firmware updates using the VENU360 Firmware Update Utility application.
When a firmware update becomes available, this Firmware Update Utility application will be found on the VENU360 product
page at dbxpro.com.
If using the DriveRack VENU360 control app, you can also update the VENU360 via the Ethernet port straight from the
application, regardless of the device you’re using for control (i.e., iOS
®
, Android
®
, Mac
®
, or Windows
®
device). Follow the
included instructions provided with each application to perform the update procedure.
To Next Page
Loading...
