4
DriveRack™
dbx
482 DriveRack™ features:
•
4 Input and 8 Outputs with routing
•
31 band graphic or 9 band parametric equalizer on every input (pre-crossover)
•
Dual Real Time Audio Analyzers (on inputs 3&4)
•
Butterworth, Bessel or Linkwitz-Riley crossover filters
•
27 Different Crossover Configurations
•
Time Alignment and Transducer Alignment Delays
•
Compressor/Limiter on every output
•
Speaker Compensation EQ (post crossover)
•
Multi-level Security System
•
TYPE IV™ Conversion System
•
Electronically balanced/RF filtered XLR Inputs and Outputs
•
Proprietary RS-485 Control Network
•
RS-232 GUI Interface for computer display and configuration
480R DriveRack™ features:
•
Dedicated remote interface to control all 480, 481 and 482 DriveRack™ units
•
31 Motorized faders for equalization control
•
32 assignable hot-keys with up to 64 different assignment capabilities
•
Built-in Real Time Audio Analyzer (with rear-panel XLR connector)
•
System Mute button
•
Proprietary RS-485 Control Network
•
RS-232 GUI Interface for computer display and configuration
•
480P Power Supply Included
•
Responds to MIDI command from mixing consoles including: Soundcraft™ SM20
and Series 5, Allen & Heath™ ML5000 and Midas™ Heritage
To Next Page
