Need help?Do you have a question about the dbx DriveRack and is the answer not in the manual?
General| Compressor | Yes |
|---|---|
| Display | LCD |
| Type | Speaker Management System |
| Outputs | 6 x XLR |
| EQ | Graphic EQ, Parametric EQ |
| Delay | Yes |
| Frequency Response | 20Hz - 20kHz |
| Power Supply | Internal |
Essential safety directives for operating the apparatus safely and preventing hazards.
Guidelines for proper power cord connection and earthing to ensure electrical safety.
Description of the RTA input jack, selector button, and the Data Wheel for navigation and editing.
A guide to quickly set up and optimize the DriveRack PA performance.
A block diagram illustrating the logical signal path through the DriveRack PA's input and output modules.
Guide to configuring system settings, including input selection and EQ options.
Procedures for selecting custom-tuned presets for main and subwoofer speakers.
Steps to select power amplifiers and configure their sensitivity settings.
Explanation of the automatic room equalization process and how to navigate to the AFS Wizard.
Instructions to adjust mixer gain before proceeding with the AFS setup.
Raising mixer gain to the desired performance level to complete the AFS setup.
Using the PREV PG, NEXT PG, and Data Wheel to edit module parameters.
Control to enable or disable the Advanced Feedback Suppression (AFS) module.
Steps to perform a hard reset, returning all parameters to factory defaults.
Detailed technical specifications for the DriveRack PA.
Adjusting crossover output gains to match Auto EQ adjustments.
Lists of available factory programs, speaker tunings, and amplifier tunings.
Principles and methods for aligning device gains to achieve optimal system performance and minimize noise.
Setting output limiters to protect amplifiers from clipping and potential damage.
To Next Page
