DEC DECpc 433 - Removing SCSI Devices (3.5-Inch Mounting Tray)

SCSI Expansion Box FRU Replacement
3. Connect the power and internal SCSI connectors and
then remove all identification tags (see Figure 4-3).
4. R ~place the cover.
Removing S
1
CSI Devices (3.5-Inch
Mounting TJray)
The following procedures provide instructions for removing and replacing a
3.5-inch SCSI device.
To remove a 3.5-inch SCSI device, do the following:
1. Remove the cover.
2. Tag and disconnect the power cable and internal SCSI
cable (see Figu1re 4-7).
4-12 DECpc 433 Workstation Service Guide
I