DEC DECpc 433 - Removing SCSI Devices (5.25-Inch Mounting Trays)

SCSI Expansion Box FRU Replacement
~--------------==--------------------------------------
Removing SCSI Devices (5.25-lnch
Mounting Trays)
Both 5.25-inch mounting trays can hold either a 5.25-inch SCSI device or a
3.5-inch
SCSI device. The removal and replacement procedures for either is
the same, only the mounting position in the mounting tray is different.
To remove a SCSI device, do the following:
..
.a.
2.
Remove the cover .
Tag
and disconnect the power cable and internal SCSI
cable (see Figure 4-3).
DECpc 433 Workstation Service Guide
4-7