DEC DECpc 433 - ROM-Based Setup

c
ROM-Based Setup
Introduction
This appendix briefly describes the Setup utility and configuration settings it
can change. Setup also displays information about configuration settings that
you can not change.
Setup is a 1lOM-based utility that modifies system configuration settings. The
settings are
stored in non-volatile RAM and take effect each time you boot the
system. In addition, the Setup utility contains a system infonnation menu
that displays L.Aal\J and secondary cache infonnation. The configuration
settings include:
• Time and date
• Setup screen language
• Floppy disk and hard disk drive type
• Amount of base memory and extended memory
• CPU speed
• SCSI hard disk enable/disable
• User definable hard disk drives
• LAN boot enable/disable
• LAN timeout
• Shadow BIOS ROM enable/disable
• Cache enable/disable
• Password enable/disable
DECpc 433 Workstation Service Guide
C-1