DEC DECpc 433 - Changing Configuration Settings

ROM-Based Setup
Changing Configuration Settings
Fours keys change configuration settings: up arrow, down arrow, + and -.
The up and down arrow keys select the configuration settings to change, the
+ and - keys select the configuration settings options. There are some
configuration settings
that you can not change; therefore, they are not
selectable. To change configuration settings:
1. Press the Page Up and Page Down keys to display the
Setup screen that contains the configuration settings
you want to change.
2. Press the up and down arrow keys to select the
configuration settings you want to change.
3. Press the + and - keys to select the configuration
setting option.
Each key press moves to the next
option. You can hold down either key to change values
continuously.
or
4. Press the + and - keys to select the configuration
setting option
and enter the new configuration setting
ortion.
DECpc 433 Workstation Service Guide
C-5