DEC DECpc 433 User Manual

Troubleshooting
Table 2--2. POST Error Messages (continued)
-·~-·
POST Error Message Solution
Countdown Message
No.
No.
070 213 Target 0: disk SCSI hard disk drive
drive connected, failure. Replace
SCSI
but not ready drive.
212
Target 0: target
SCSI ID conflicts. Set
connected, but is correct SCSI ID number.
not a disk drive Refer to your SCSI
Expansion Box
Installation Guide .
211 Target 0: target SCSI hard disk drive
connected,
but
failure. Replace SCSI
has a fault
drive.
210 Target 0: target SCSI expansion box not
not
connected connected, loose
connections, or
SCSI ID
conflicts. Connect
the
SCSI expansion box,
check connections,
and
run Setup.
200 Host adapter SCSI hardware failure.
diagnostic
Replace
SCSI device.
failure
060 0021
xxxxOh optional
Correct the address
ROM bad
conflict or replace
the
checksum = xx ROM chip.
DECpc 433 Workstation Service Guide
2-9

DEC DECpc 433 Specifications

General

Brand	DEC
Model	DECpc 433
Category	Desktop
Language	English