Dectris EIGER 2 - Page 33

Warning #2
In the extg_mode ”single”, ntrigger has to be set to 1. If ntrigger is not congured correctly, an
error will be returned and the mode cannot be enabled.
detector | cong | trigger_mode {value: ”extg”}
detector | cong | extg_mode {value: ”single”}
detector | cong | nexpi {value: 123456}
detector | cong | nimages {value: 20}
detector | cong | ntrigger {value: 1}
detector | cong | countrate_correction_applied {value: ”false”}
DECTRIS EIGER
®
2 User Manual v1.8.2 28 | 36